In need of some HVAC Parts [message #69220] |
Fri, 01 January 2010 14:20 |
jwillard
Messages: 118 Registered: May 2004 Location: Silver City, NM
Karma:
|
Senior Member |
|
|
I jumped into the dashboard disassembly some more this morning and found a big source of my troubles. Apparently, at some point with a PO, there was a fire over at the extream right side of the dash. Don't know what might have caused it, as there isn't any wiring over there but, none the less. It melted the the ductwork that goes from the plastic Defroster Vent assembly down to the AC vent in the front of the dash and seems to have also melted the diaphram in the control servo. Won't hold and vacuum. The defroster duct also sustained some melting damage. Someone had duct taped (Isn't that what it's for? ) everything together but the lacking that vent functioning properly, the massive vacume leak AND the fact that the duct itself wasn't sealing to the inside of the dash where the vents are tells me I've found my problem. ALso, the Defroster vent, while functioning and holding vacuum, doesn't close all the way. It's about 3/4 inch from the sealing surface.
Anyway, I need the right side duct and servo from a 73. Anyone out there have some pieces parts?
Jeff Willard
Silver City, NM
1973 ex-Glacier
[Updated on: Fri, 01 January 2010 14:21] Report message to a moderator
|
|
|