| Need a source for Dinette edging [message #67493] |
Tue, 15 December 2009 09:42  |
 |
Matt Colie
Messages: 8547
Registered: March 2007
Location: S.E. Michigan
Karma:
|
Senior Member |
|
|
The dinette of my 73 is 5/8 plywood with a plastic T-mold edging. Well, some of it is. Some of it is now plain plywood edge with a groove cut in it. I would like to replace the edging, but I can't find a source for 5/8 material. There are lots of places I can get 3/4 or 13/16, but no 5/8.
I have put many feet of veneer edging on plywood, but I really don't want the hard edges on the dinette. I also don't want to tape and plane the edges of the dinette unless there is just no choice at all.
Matt
Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
