GMCforum: GMCnet » [GMCnet] Atwood 2450 Hydroflame Furnace T-Stat Wiring

Home » Public Forums » GMCnet » [GMCnet] Atwood 2450 Hydroflame Furnace T-Stat Wiring

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Atwood 2450 Hydroflame Furnace T-Stat Wiring [message #67340]

Sun, 13 December 2009 12:07

Alan LaVoisne

Messages: 51
Registered: September 2009
Location: Ortonville, MI

Karma:

Member

Hi all:
I am installing an Atwood Hydroflame furnace in my GMC. I am trying to
figure out if the T-Stat need 2 or 3 or 4 wires. Does anybody have one of
these installed?

This is the Thermostat.
http://www.atwoodmobile.com/heating-systems/digital-thermostat.asp
Manual:
http://www.atwoodmobile.com/manuals/furnaces/MPD%2031492%20SP%201.08.pdf

The wiring diagram shows +12v, Grnd, and TH from furnace.

The furnace wiring shows +12v, -12V, and two wires labeled Thermostat.

I am thinking I need to run the two wires for the thermostat plus an extra
wire carrying 12VDC constant,

The furnace is 2 stage and is supposed to switch to high and low output
automatically but the thermostat can also lock in high or low and force the
furnace to run at those speeds.

Thanks. You guys are great.

Alan LaVoisne
75 Glennbrook.
Ortonville, MI
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

1975 26' Glenbrook Mostly Original Ortonville, MI

Report message to a moderator

[Message index]

[GMCnet] Atwood 2450 Hydroflame Furnace T-Stat Wiring

By: Alan LaVoisne on Sun, 13 December 2009 12:07

Previous Topic:	[GMCnet] Moon Speed Equipment
Next Topic:	[GMCnet] Propane Power

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Oct 31 14:35:28 CDT 2024

Total time taken to generate the page: 0.02749 seconds