GMCforum: GMCnet » Frame Repair

Home » Public Forums » GMCnet » Frame Repair

Show: Today's Messages :: Polls :: Message Navigator

Frame Repair [message #66032]

Sun, 29 November 2009 23:33

AStasunas

Messages: 58
Registered: April 2009
Location: Winter Springs, Fl

Karma:

Member

I am restoring a 1975 Eleganza. I just removed the bogies and I discovered rust behind the wheels. The drivers side is the worst with some areas bowed from rust and delaminating. While it is not rusted through I think I should deal with it. My plan is to get some 1/8 in steel bent in an "L" and removed the side and bottom portion either side of the bogie mounts and weld the new pieces in place.
Any one with similar experiences and/or advice will be appreciated.

"Vinnie" 1975 Eleganza, Winter Springs, Fl

Report message to a moderator

[Message index]

		Frame Repair By: AStasunas on Sun, 29 November 2009 23:33
		Re: [GMCnet] Frame Repair By: GMCWiperMan on Mon, 30 November 2009 06:43
		Re: Frame Repair By: AStasunas on Mon, 30 November 2009 09:16
		Re: [GMCnet] Frame Repair By: Tangerine on Mon, 30 November 2009 10:29
		Re: [GMCnet] Frame Repair By: Little Yimmy on Mon, 30 November 2009 22:40
		Re: [GMCnet] Frame Repair By: AStasunas on Mon, 30 November 2009 23:19
		Re: [GMCnet] Frame Repair By: Jim Bounds on Tue, 01 December 2009 05:54
		Re: [GMCnet] Frame Repair By: Terry Skinner on Tue, 01 December 2009 07:30
		Re: [GMCnet] Frame Repair By: Little Yimmy on Tue, 01 December 2009 08:34
		Re: [GMCnet] Frame Repair By: GMCWiperMan on Mon, 30 November 2009 11:32
		Re: [GMCnet] Frame Repair By: jimk on Mon, 30 November 2009 11:59
		Re: [GMCnet] Frame Repair By: k2gkk on Mon, 30 November 2009 12:55
		Re: Frame Repair By: fred v on Mon, 30 November 2009 12:00
		Re: Frame Repair By: Adrien G. on Wed, 02 December 2009 00:52
		Re: Frame Repair By: JohnL455 on Wed, 02 December 2009 17:33

Previous Topic:	[GMCnet] Oil Filler Caps
Next Topic:	[GMCnet] Engine running rough

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Oct 19 11:47:02 CDT 2024

Total time taken to generate the page: 0.04472 seconds