GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Crossover Intake Manifold Temps
Crossover Intake Manifold Temps [message #61913] Tue, 27 October 2009 09:14 Go to previous message
larry.whisler is currently offline  larry.whisler   United States
Messages: 356
Registered: August 2005
Karma:
Senior Member
I was just reading the thread on the use of block off plates on the intake manifold and I have a question.

Shortly after returning home after a recent trip, we were unloading the coach and my wife made a comment about gasoline fumes in the coach.

I removed the hatch cover and top of the air filter to find that the carb was boiling out fuel.

I have headers and a new stainless steel exhaust system so I know the exhaust is not causing back pressure.

Is it normal for the manifold to run this hot?

larry whisler
76 glenbrook
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Removing Decals
Next Topic: [GMCnet] Personality Conflicts
Goto Forum:
  


Current Time: Fri Nov 01 01:37:31 CDT 2024

Total time taken to generate the page: 0.00668 seconds