GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] Coachmen Dry Bath Shower Stall
[GMCnet] Coachmen Dry Bath Shower Stall [message #61781] Mon, 26 October 2009 15:26 Go to previous message
Ray Erspamer is currently offline  Ray Erspamer   United States
Messages: 1707
Registered: May 2007
Location: Milwaukee Wisconsin
Karma:
Senior Member
Good Afternoon

Does anyone have any dimensional info on the Coachmen dry bath shower stall and what clearances exist between the rear wheel well and the shower and the refrigerator next to it, etc?

My furnace duct going to the back bedroom must be crushed, damaged, torn or something, because we get absolutely no air back there even with the brand new furnace that has a very high powered blower. I've heard some people say that Coachmen just set the shower stall down and crushed the duct, but I need to find out the dimensions so I can fab a new eliptical one to fish through.

Three weekends ago we went camping to northern Wis and it got down to 23 degrees.....climbing back into bed was like climbing into a deep freezer......I'm not fond of sleeping with a hoodie sweatshirt, long johns and wool hunting socks on. I was so ticked off I came home and winterized the coach and put it into storage, not what I really wanted to do......so I think I'll address the heat issue.

Any help would be appreciated.

Thanks

Ray

Ray & Lisa Erspamer
78 Royale Center Kitchen
The Malosco Cruiser (TZE368V101144)
Wauwatosa, Wisconsin 53226
Email: 78GMC-Royale@att.net
414-745-3188
Web Site: http://ray-lisa.page.tl/
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



Ray Erspamer 78 GMC Royale Center Kitchen 403, 3.70 Final Drive Holley Sniper Quadrajet EFI System, Holley Hyperspark Ignition System 414-484-9431
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Vacuum
Next Topic: [GMCnet] Vacuum
Goto Forum:
  


Current Time: Fri Nov 01 13:22:52 CDT 2024

Total time taken to generate the page: 0.02118 seconds