GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Do we have to bench bleed it?
Do we have to bench bleed it? [message #370210] Wed, 27 July 2022 11:22 Go to previous message
wally is currently offline  wally   United States
Messages: 643
Registered: August 2004
Location: Omaha Nebraska
Karma:
Senior Member
I helping a GMCer get his brakes fixed. He had a hold down spring break and chew up the shoes and drum. While the drum was off getting turned the brake pedal must have got pressed or something and the rear fluid went away ( master front reservoir empty). Can we use a pressure bleeder straight away or do we need to remove and bench bleed the master. Front brakes are intact and work. Trying to save some work..not having joy with the pump the pedal bleed routine.

Wally Anderson
Omaha NE
75 Glenbrook

[Updated on: Wed, 27 July 2022 11:32]

Report message to a moderator

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Check my electrical math- battery to inverter to Air Con
Next Topic: Possibly the Engine is not Running Hot
Goto Forum:
  


Current Time: Fri Sep 27 08:57:56 CDT 2024

Total time taken to generate the page: 0.00929 seconds