GMCforum: GMCnet » IGN Fuse Panel Spade

Home » Public Forums » GMCnet » IGN Fuse Panel Spade

Show: Today's Messages :: Polls :: Message Navigator

IGN Fuse Panel Spade [message #367279]

Thu, 21 October 2021 18:45

Tom Katzenberger

Messages: 399
Registered: June 2019
Location: Kingsville, MD

Karma:

Senior Member

Does anyone know off hand on a 1977 is the spare IGN spade post fused or should I put a fuse on it before I use it?

I was going to use it to supply power to a firewall relay which will energize another fuse panel.

Thanks again,
Tom K.

Tom & Oki Katzenberger, Kingsville, Maryland, 1977 23' Birchaven, 455 C.I.D., Micro Level, Howell EBL-EFI Spark Control, Macerator, York Air Compressor, 6 Wheel Disc, Quadra Bag, Onan W/Bovee Ignition

[Updated on: Thu, 21 October 2021 18:47]

Report message to a moderator

[Message index]

		IGN Fuse Panel Spade By: Tom Katzenberger on Thu, 21 October 2021 18:45
		Re: IGN Fuse Panel Spade By: JohnL455 on Fri, 22 October 2021 11:37
		Re: IGN Fuse Panel Spade By: Tom Katzenberger on Fri, 22 October 2021 13:11
		Re: IGN Fuse Panel Spade By: Tom Katzenberger on Fri, 22 October 2021 13:18
		[GMCnet] Re: IGN Fuse Panel Spade By: James Hupy on Fri, 22 October 2021 13:48
		Re: IGN Fuse Panel Spade By: Tom Katzenberger on Fri, 22 October 2021 14:40
		[GMCnet] Re: IGN Fuse Panel Spade By: James Hupy on Fri, 22 October 2021 16:03
		Re: IGN Fuse Panel Spade By: Tom Katzenberger on Sat, 23 October 2021 07:46

Previous Topic:	[GMCnet] RH Output Shaft Bearing
Next Topic:	Transmission pan leaks

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Sep 24 19:28:15 CDT 2024

Total time taken to generate the page: 0.01000 seconds