GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Atwood marine water heater (no worky)
Atwood marine water heater [message #366740] Sun, 12 September 2021 19:46 Go to previous message
boybach is currently offline  boybach   
Messages: 566
Registered: December 2020
Location: Vancouver Island
Karma:
Senior Member
I usually only park up for a day or two before moving on and my heat exchanger keeps my hot water plenty warm/extremely hot.

I never bothered switching on the power to the Atwood marine heater, except this last week I was at a campground with hookups (first time ever hooked up) so I plugged in. After a couple of days, the hot water from running the engine was used up/cold so I switched on the power to the unit. After about 3 hours, I turned on the hot water tap and the water hadn't warmed up at all so it looks like the heater isn't working.

Is there a reset button on this unit or some switch other than the main switch near the breaker box?

TIA

Larry


Larry - Victoria BC - 1977 ex-Palm Beach "Ol' Leaky" 40,000 miles, PO said everything working but forgot the word NOT. Atwood helium fridge, water heater & furnace. SS exhaust system, Onan, Iota Converter, R134A, New fuel lines & heat exchange hoses
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Looking for electric fuel pump control
Next Topic: [GMCnet] Cruise/wiper function on turn signal
Goto Forum:
  


Current Time: Tue Sep 24 13:12:49 CDT 2024

Total time taken to generate the page: 0.00799 seconds