GMCforum: GMCnet » Rodchester quad mixture adjustment

Home » Public Forums » GMCnet » Rodchester quad mixture adjustment

Show: Today's Messages :: Polls :: Message Navigator

Rodchester quad mixture adjustment [message #364134]

Thu, 20 May 2021 09:22

tgeiger

Messages: 518
Registered: February 2006
Location: kansas city

Karma:

Senior Member

Quick question, what is the full turn count on the fuel mixture screws on the Rochester quad from the seated position? Trying to get a good starting point to do a maximum vacuum air/fuel mixture setting. I’ve watch videos and the back out number seems to vary a bit. And also, what port on the carb should I take a vacuum reading from? The video says PCV valve but mine looks like that port goes to the distributor’s vacuum advance can.

Thanks,
TG

Tom Geiger 76 Eleganza II KCMO

[Updated on: Thu, 20 May 2021 09:29]

Report message to a moderator

[Message index]

		Rodchester quad mixture adjustment By: tgeiger on Thu, 20 May 2021 09:22
		Re: Rodchester quad mixture adjustment By: JohnL455 on Thu, 20 May 2021 09:54

Previous Topic:	magic chef oven gas valve
Next Topic:	[GMCnet] The Micro Level system. Is an amazing produce

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Oct 02 11:25:33 CDT 2024

Total time taken to generate the page: 0.09880 seconds