GMCforum: GMCnet » Crank Oil Seal

Home » Public Forums » GMCnet » Crank Oil Seal

Show: Today's Messages :: Polls :: Message Navigator

Crank Oil Seal [message #363239]

Mon, 05 April 2021 15:46

Tom Katzenberger

Messages: 399
Registered: June 2019
Location: Kingsville, MD

Karma:

Senior Member

Gentlemen,

I am installing the crank oil seal behind the hormonic balancer. The book states to use the J-5154-01 tool to set the seal at .005 from the bottom of the tool. I do not have the special tool.

Is there a field method to set the seal to the desired depth, or is there a measurement from the exterior surface in which the seal should be set?

Thanks again,
Tom

Tom & Oki Katzenberger, Kingsville, Maryland, 1977 23' Birchaven, 455 C.I.D., Micro Level, Howell EBL-EFI Spark Control, Macerator, York Air Compressor, 6 Wheel Disc, Quadra Bag, Onan W/Bovee Ignition

Report message to a moderator

[Message index]

		Crank Oil Seal By: Tom Katzenberger on Mon, 05 April 2021 15:46
		Re: Crank Oil Seal By: Matt Colie on Mon, 05 April 2021 17:18
		Re: Crank Oil Seal By: Tom Katzenberger on Mon, 05 April 2021 21:08
		Re: Crank Oil Seal By: Tom Katzenberger on Tue, 06 April 2021 14:53

Previous Topic:	Camping possibilities near Canton Ohio
Next Topic:	OEM Sol-Aire Furnace crapped out

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Oct 01 10:33:29 CDT 2024

Total time taken to generate the page: 0.00837 seconds