GMCforum: GMCnet » offset bushings

Home » Public Forums » GMCnet » offset bushings (Backwards?)

Show: Today's Messages :: Polls :: Message Navigator

offset bushings [message #362058]

Thu, 28 January 2021 19:10

skip2

Messages: 544
Registered: September 2011
Location: Winter Haven,FL (center o...

Karma:

Senior Member

After all this time I am doubting that I put my offset bushings in correctly on my upper A arms. I've got them in the rear with the supposed arrow (the fat spot) toward the ball joint, the bolt inboard. I hope I've got it wrong, it will explain alot. Just makes since the way I've got them, but cranial anal inversion is nothing new to me. Any definitive answers on this. All the research I've done says I'm backwards.Thanks.

Skip Hartline

74 Canyon Lands, FiTech, 3.7 FD LSD, Manny Tranny, Springfield Distributor, 2001 Chevy Tracker Ragtop Towd

Report message to a moderator

[Message index]

		offset bushings By: skip2 on Thu, 28 January 2021 19:10
		Re: offset bushings By: RF_Burns on Thu, 28 January 2021 20:48
		Re: offset bushings By: JohnL455 on Thu, 28 January 2021 20:48
		Re: [GMCnet] offset bushings By: Ken Henderson on Thu, 28 January 2021 20:46
		Re: offset bushings By: skip2 on Fri, 29 January 2021 18:51
		Re: [GMCnet] offset bushings By: Ken Henderson on Fri, 29 January 2021 19:29
		Re: [GMCnet] offset bushings By: skip2 on Sat, 30 January 2021 08:11
		Re: offset bushings By: skip2 on Sat, 30 January 2021 08:20
		Re: [GMCnet] offset bushings By: Keith V on Sat, 30 January 2021 11:02

Previous Topic:	[GMCnet] 77 Kingsley on Portland craigslist
Next Topic:	Re: [GMCnet] Wiper Pigtails

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Oct 03 03:39:28 CDT 2024

Total time taken to generate the page: 0.00893 seconds