GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Why not fix one ton scrub radius with wheel offset?
Why not fix one ton scrub radius with wheel offset? [message #361905] Thu, 21 January 2021 17:56 Go to previous message
Joe Weir is currently offline  Joe Weir   
Messages: 769
Registered: February 2013
Location: Columbia, SC
Karma:
Senior Member
Like the title says. If the One Ton kit puts the center of the tire @1.5" too far outboard, why not reduce the width of the spacer, or use a wheel with 1.5" less offset?

Or, did I not see that discussion?

For example, if the wheels clear the calipers, This chevy wheel has 28mm of positive offset - just over an inch. Seems that would help.

https://www.bbwheelsonline.com/oe-creations-pr156-wheels-rims-16x6-5-8x6-5-8x165-1-polished-28mm-156p-668128/

https://www.bbwheelsonline.com/oe-creations-pr156-wheels-rims-16x6-5-8x6-5-8x165-1-polished-28mm-156p-668128/


76 Birchaven - "Wicked Mistress" - New engine, trans, alum radiator, brakes, Sully airbags, fuel lines, seats, adult beverage center... those Coachmen guys were really thinking about us second hand owners by including that beverage center... Columbia, SC.
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Parts
Next Topic: Looking for advice
Goto Forum:
  


Current Time: Mon Jul 08 02:45:41 CDT 2024

Total time taken to generate the page: 0.00991 seconds