GMCforum: GMCnet » [GMCnet] Subject: Re: Cylinder Head Torque Value

Home » Public Forums » GMCnet » [GMCnet] Subject: Re: Cylinder Head Torque Value

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Subject: Re: Cylinder Head Torque Value [message #359525]

Sat, 17 October 2020 13:18

THOMAS R WHITTON

Messages: 47
Registered: September 2016

Karma:

Member

Jim, Jim, Matt, Hal, Ken and others that answered my cylinder head torque value question... MANY THANKS! Let me know if I have it wrong but I'm simply going to crack all the bolts on the left head and re-torque them to 85 foot pounds in sequence.
All the best,
Tom Whitton26 foot updated GMCPaducah, KY
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

[Message index]

		[GMCnet] Subject: Re: Cylinder Head Torque Value By: THOMAS R WHITTON on Sat, 17 October 2020 13:18
		Re: [GMCnet] Subject: Re: Cylinder Head Torque Value By: kingd on Sun, 18 October 2020 15:09

Previous Topic:	[GMCnet] Fresh Water Tank Level Sensor
Next Topic:	Main Dash Ground Location 77 Eleganza II

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Sep 19 15:14:27 CDT 2024

Total time taken to generate the page: 0.00798 seconds