| Adjusting the Entrance Door [message #357336] |
Wed, 29 July 2020 21:31  |
 |
Tom Lins
Messages: 372
Registered: February 2004
Location: St Augustine, FL
Karma:
|
Senior Member |
|
|
After repairing the the bottom hinge on my entrance door.
The attachment point on the door was so bad that the bottom of the door was literally flopping around.
The door now is nice and solid with no flopping around at all.
I have noticed that the top of the door has a gap of close to 3/8 inch at the hinge side
and the bottom of the door has only a gap of about 1/16 to 1/8 inch.
The manual says to adjust the door horizontally with shims.
Before I tear into the interior to get at the back of the hinges has anyone done this differently?
Tom Lins
St Augustine, FL
77 GM Rear Twin, Dry Bath, 455, Aluminum Radiator Quad-Bag Suspension Solar Panel
Manuals on DVD
YOUTUBE Channel: GMC Dealer Training Tapes
http://www.bdub.net/tomlins/
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
