Pusher Fan [message #357195] |
Sun, 26 July 2020 11:23 |
|
JBO
Messages: 65 Registered: August 2012 Location: South Western Ontario
Karma:
|
Member |
|
|
Just curious if anyone has installed a pusher fan and had positive results?
It’s been a very hot summer here and I have noticed that my temps have crept up on a few runs on extremely hot days. Mostly on big hills/mountains such as in the Quebec Laurentian’s.
I have noticed that in extreme conditions my 2 year old Sanden will start to squeal intermittently. I really don’t want to blow that baby apart. It is doing a fantastic job of keeping the 78 nice and cool. Thanks to Jim K, Applied and this forum I DIYed the AC a couple years back and so far so good.
My H20 temps usually hold steady at 190 but it has moved over 200 in extreme weather. I have gauges on trans fluid, motor oil temp and diff temps. It’s a bit unnerving to watch those three creep up, that’s usually when you may hear the odd squeal.
I believe my rad is in tip top shape as the PO had it recored when he installed a DP 455.
I also have a new old stock Griffin Rad that is slightly damaged. I haven’t taken it anywhere to have it tested as of yet.
On the Griffin note: is there a brass fitting kit that is required for the Griffin rad?
Thanks in advance...
Jim Owens,
78 Royale,
Out skirts of Kitchener, Ontario
[Updated on: Sun, 26 July 2020 11:25] Report message to a moderator
|
|
|