GMCforum: GMCnet » Bogie greasers

Home » Public Forums » GMCnet » Bogie greasers (Do I need the brass bit with the O-ring???)

Show: Today's Messages :: Polls :: Message Navigator

Bogie greasers [message #353404]

Wed, 01 April 2020 01:41

Green machine

Messages: 184
Registered: July 2019
Location: North Vancouver BC

Karma:

Senior Member

I installed the quad bags I robbed from my parts coach today and while I was "picking" I pulled the bogie greasers that had the dual zerks. Took me a while to figure out the concept but now that I shot some grease threw them, I sorted it out. Pretty cool - I'm sold! Only thing is, only 1 of the 4 I pulled came out with the brass fitting on the end with the O-ring. I suspect this bit is special order/custom made(correct me if I'm wrong) but I wonder if it still better than stock to install them even w/o the end bit? I suspect yes, but looking for advice.

TIA for the input.

Stay safe.

Shawn Harris North Vancouver, Canada 1977 Palm Beach 403

Report message to a moderator

[Message index]

		Bogie greasers By: Green machine on Wed, 01 April 2020 01:41
		Re: Bogie greasers By: 6cuda6 on Wed, 01 April 2020 06:32
		Re: Bogie greasers By: Jp Benson on Wed, 01 April 2020 07:41
		Re: Bogie greasers By: Ken Burton on Wed, 01 April 2020 09:39
		Re: [GMCnet] Bogie greasers By: jimk on Wed, 01 April 2020 16:52
		Re: [GMCnet] Bogie greasers By: Green machine on Wed, 01 April 2020 22:15
		Re: [GMCnet] Bogie greasers By: jimk on Wed, 01 April 2020 22:24
		Re: [GMCnet] Bogie greasers By: Rob on Wed, 01 April 2020 07:58

Previous Topic:	Brakes Acting Up
Next Topic:	Onan float bowl gasket

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Sep 20 02:03:03 CDT 2024

Total time taken to generate the page: 0.02733 seconds