GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » Flushing Trans and Oil Cooler Lines
Flushing Trans and Oil Cooler Lines [message #352393] Tue, 25 February 2020 20:03 Go to previous message
Melbo is currently offline  Melbo   United States
Messages: 144
Registered: August 2018
Location: Albuquerque NM
Karma:
Senior Member
What do you use to flush transmission cooler and oil cooler lines. I am reinstalling the radiator and want to flush the cooler lines before reinstalling them. The metal trans lines I can use refrigerant line flush and it is volatile enough to evaporate and not hurt the metal lines BUT the oil cooler lines are metal and rubber hose and I want them to be cleaned out but what is the best to clean them with.

Thanks in advance for suggestions.

Melbo

Albuquerque NM Bus Conversion 1978 MCI 1973 GMC

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Oil filter mount/adapter screen
Next Topic: Fuel line routing question
Goto Forum:
  


Current Time: Thu Sep 19 23:06:30 CDT 2024

Total time taken to generate the page: 0.01690 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software