GMCforum: GMCnet » Type of fitting / threads for power level control valve

Home » Public Forums » GMCnet » Type of fitting / threads for power level control valve

Show: Today's Messages :: Polls :: Message Navigator

Type of fitting / threads for power level control valve [message #351219]

Sat, 04 January 2020 11:43

uprooted

Messages: 72
Registered: December 2019
Location: Hilliard, OH

Karma:

Member

I am rebuilding one of the power level control valves. Turns out nothing was wrong with it, it had just been hooked up wrong (lines on the wrong ports). One of the previous owners had replaced the 3 small fitting on the back of that valve with plastic ones that are now stripped. I am trying to re-create the fitting using fitting found at the hardware store. I am close but can't figure out exactly what kind of threads are in the 3 holes in the back of the control valve. 1/8" MIP is VERY close but only goes in about 1.5 full turns by hand. Seems like pushing it further would be a bad idea

Thanks in advance

Corey P / Hilliard, OH / 1974 Glacier 26' / 3.70 FD / ION Wheels

Report message to a moderator

[Message index]

		Type of fitting / threads for power level control valve By: uprooted on Sat, 04 January 2020 11:43
		Re: Type of fitting / threads for power level control valve By: jhbridges on Sat, 04 January 2020 13:08
		Re: [GMCnet] Type of fitting / threads for power level control valve By: James Hupy on Sat, 04 January 2020 13:28
		Re: Type of fitting / threads for power level control valve By: uprooted on Sat, 04 January 2020 18:12
		Re: [GMCnet] Type of fitting / threads for power level control valve By: James Hupy on Sat, 04 January 2020 18:24
		Re: [GMCnet] Type of fitting / threads for power level control valve By: Hal StClair on Sat, 04 January 2020 19:27
		Re: [GMCnet] Type of fitting / threads for power level control valve By: Jp Benson on Sat, 04 January 2020 21:48
		Re: [GMCnet] Type of fitting / threads for power level control valve By: jimk on Sat, 04 January 2020 22:53
		Re: Type of fitting / threads for power level control valve By: C Boyd on Sun, 05 January 2020 07:45
		Re: Type of fitting / threads for power level control valve By: uprooted on Sun, 05 January 2020 08:57
		Re: Type of fitting / threads for power level control valve By: Melbo on Sun, 05 January 2020 11:34
		Re: [GMCnet] Type of fitting / threads for power level control valve By: sgltrac on Sun, 05 January 2020 13:59
		Re: Type of fitting / threads for power level control valve By: GMC Cruse on Sun, 05 January 2020 18:33

Previous Topic:	SEMNO GMC Owners network lunch -18 January
Next Topic:	[GMCnet] Curious parts question

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Sep 20 03:33:46 CDT 2024

Total time taken to generate the page: 0.02997 seconds