GMCforum: GMCnet » Nichrome wire bypass

Home » Public Forums » GMCnet » Nichrome wire bypass (Yah yah i know....)

Show: Today's Messages :: Polls :: Message Navigator

Nichrome wire bypass [message #350104]

Wed, 13 November 2019 21:26

6cuda6

Messages: 975
Registered: June 2019

Karma:

Senior Member

Ok ok...i know there are tons of posts and pics etc but heres the question:

Should one re-wire the whole circuit as JB suggests? I see pics of how Kelvin did it by splicing in and clipping one end of the nichrome?

To much info sometimes is just as bad as not enough......the mechanic in me says re-wire the whole circuit....the practical side says a bypass can be just as good.

I only want to do this once so i want opinions from those who have personally done this.

Rich Mondor, Brockville, ON 77 Hughes 2600

Report message to a moderator

[Message index]

		Nichrome wire bypass By: 6cuda6 on Wed, 13 November 2019 21:26
		Re: Nichrome wire bypass By: Ken Burton on Thu, 14 November 2019 00:05
		Re: Nichrome wire bypass By: RF_Burns on Thu, 14 November 2019 04:18
		Re: [GMCnet] Nichrome wire bypass By: Ken Henderson on Thu, 14 November 2019 05:48
		Re: [GMCnet] Nichrome wire bypass By: Jp Benson on Thu, 14 November 2019 09:09
		Re: [GMCnet] Nichrome wire bypass By: Richard Denney on Thu, 14 November 2019 12:40

Previous Topic:	1975 avion panel connections
Next Topic:	Upgrading the big 3 or big 4 wires?

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Sep 20 15:26:00 CDT 2024

Total time taken to generate the page: 0.00523 seconds