GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » no washers or lock washers (old foreign car mechanic lack of knowledge-experience)
no washers or lock washers [message #345283] Sun, 14 July 2019 14:37 Go to previous message
Jack Ramsey is currently offline  Jack Ramsey   United States
Messages: 82
Registered: December 2012
Location: Tulare, CA
Karma:
Member
I know this seems like a stupid question, but my 75 Palm Beach 455 has very few flat washers or lock washers in the engine bay. (except on the fan shroud) My years with German cars, and climbing radio towers, we had flat and lock washers on EVERYTHING. I went out and bought a bunch of spare washers, just in case, and now upon re-assembly, from the water pump out, I am wondering if this is overkill and even might be sacrificing reliability, by having less thread into the cast iron and other assemblies. Yes this is my first American car real work, and you would think at 66, I would know, but I don't. Porsche 8mm nuts (13 mm socket) had average of 18 ft lbs of torque, I'm really not used to this, it is a whole different world.

Thanks,

Jack


Jack Ramsey Tulare, CA TZE165V101526 1975 Palm Beach
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Re: [GMCnet] the old venturi shroud and new 2 piece
Next Topic: [GMCnet] Stranded: Ignition switch, key switch or starter solenoid?
Goto Forum:
  


Current Time: Sun Sep 22 01:19:27 CDT 2024

Total time taken to generate the page: 0.00777 seconds