GMCforum: GMCnet » Shocks rub CV boot

Home » Public Forums » GMCnet » Shocks rub CV boot (What's this mean?)

Show: Today's Messages :: Polls :: Message Navigator

Shocks rub CV boot [message #344358]

Wed, 19 June 2019 20:49

tmsnyder

Messages: 151
Registered: January 2014

Karma:

Senior Member

I'm pulling the half shafts on my recently acquired 1976 in order to install new boots on the outer CV joints. Both sides were torn.

In the process, I removed the shocks and found that they :

1. Are relatively new Bilstein shocks, with fresh looking paint and not much grime on them.

2. Show wear marks on the side, from the boots maybe? Right through the paint.

Any ideas how this could be? Maybe wrong shocks installed?

Is there any way an out of alignment front end could cause this? Or are the A arms the wrong ones?

Todd Snyder, Buffalo NY 1976 Eleganza II

Report message to a moderator

[Message index]

		Shocks rub CV boot By: tmsnyder on Wed, 19 June 2019 20:49
		Re: [GMCnet] Shocks rub CV boot By: jimk on Wed, 19 June 2019 22:18

Previous Topic:	[GMCnet] Exhaust manifold flange spring bolts length?
Next Topic:	How hard to determine final drive ratio (Revcon)

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Sep 21 02:41:54 CDT 2024

Total time taken to generate the page: 0.00712 seconds