| A/C compressor rear mount [message #343838] |
Sat, 01 June 2019 12:38  |
jhbridges
Messages: 8412
Registered: May 2011
Location: Braselton ga
Karma:
|
Senior Member |
|
|
I have the compressor mounter loosely (yes, you can do it one-handed... if you have a bottle jack) and I note there's a gap between the upper bolt holes on the front and rear brackets of about 3/16 inch. The parts book shows the bolt going through the front bracket and threading into the rear bracket with nothing in between. Should there be a spacer between the two, or do I have something mismounted here?
Rear bracket mounts to a hole in the intake and a stud on the front rocker cover gasket. Front bracket bolts directly to the engine block in three places. I don't see a lot of room for movement here.
--johnny
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
