| [GMCnet] Tid bit. Make changing your trans fluid simpler the next time [message #343657] |
Sat, 25 May 2019 12:00  |
BobDunahugh
Messages: 2465
Registered: October 2010
Location: Cedar Rapids, IA
Karma:
|
Senior Member |
|
|
You can install a drain plug in the stock steel pans. ( I believe that your aluminum has that.) I install the drain in the side. Get an engine drain plug that's the same one in your engine. Get a short jam nut for inside.. Drill the pan. Install the bolt and nut without the bolt gasket. The nut just needs to be tacked in. The gasket on the bolt will be your seal. Be very careful to position the drain. As to miss the valve body, and filter of the trans. When you change your fluid. You can only get half of that fluid out. In this way you can simply change half out every year. Then change the filter every 40, to 50,000 miles. Fluids CHEEP. Transmissions aren't. Only reinstall the same type of fluid that's already in there. Bob Dunahugh
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
