GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Clearance lights LED bulbs
Clearance lights LED bulbs [message #342535] Mon, 15 April 2019 18:01 Go to previous message
ree_eric is currently offline  ree_eric   
Messages: 43
Registered: February 2004
Location: Alexandria, Ontario, Cana...
Karma:
Member
I am putting in LEDs in the rear clearance lights and of course the polarity is reversed. I am not keen on removing the inside rear panel. Where is the junction for the 5 lights and are they all junctioned together or separately. Could I make an access opening to get at all the wires? I could also swap the wires in the fixtures, there does seem to be some slack in the red and black wires.Is the polarity reversed on the front clearance lights too?

Eric & Ree '74 ex-Sequoia (parts) '75 Eleganza (TB, exhaust x-over blocking plates, Manny reaction arms and discs, 3"exhaust rear muffler, aux vacuum, fuel tank sealing, rebuilt senders and new rubber, propane hot water heater.) Alexandria, Ontario, Canada
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Master Cylinder Rebuild or Replace?
Next Topic: [GMCnet] GMCnet] Shoulder Belts
Goto Forum:
  


Current Time: Wed Sep 25 05:32:03 CDT 2024

Total time taken to generate the page: 0.01278 seconds