GMCforum: GMCnet » [GMCnet] Why put in thicker body pads then GM engineeringcalled for.?

Home » Public Forums » GMCnet » [GMCnet] Why put in thicker body pads then GM engineeringcalled for.?

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Why put in thicker body pads then GM engineeringcalled for.? [message #342443]

Thu, 11 April 2019 00:16

BobDunahugh

Messages: 2465
Registered: October 2010
Location: Cedar Rapids, IA

Karma:

Senior Member

I saw some photos here a few days ago. That was showing thicker pads then GM engineering called for. I believe that the originals were at .5 inch, or just under. I have some that I can check. thick Bob Dunahugh
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

[Message index]

		[GMCnet] Why put in thicker body pads then GM engineeringcalled for.? By: BobDunahugh on Thu, 11 April 2019 00:16
		Re: [GMCnet] Why put in thicker body pads then GM engineeringcalled for.? By: Harry on Thu, 11 April 2019 10:44
		Re: [GMCnet] Why put in thicker body pads then GM engineeringcalled for.? By: BobDunahugh on Thu, 11 April 2019 12:23
		Re: [GMCnet] Why put in thicker body pads then GM engineeringcalled for.? By: BobDunahugh on Thu, 11 April 2019 23:27
		Re: [GMCnet] Why put in thicker body pads then GM engineeringcalled for.? By: Jp Benson on Fri, 12 April 2019 06:42
		Re: [GMCnet] Why put in thicker body pads then GM engineeringcalled for.? By: Justin Brady on Fri, 12 April 2019 08:42
		Re: [GMCnet] Why put in thicker body pads then GM engineeringcalled for.? By: Jp Benson on Fri, 12 April 2019 21:55
		Re: [GMCnet] Why put in thicker body pads then GM engineeringcalled for.? By: RF_Burns on Thu, 11 April 2019 13:15
		Re: [GMCnet] Why put in thicker body pads then GM engineeringcalled for.? By: Burt and Faye curtis on Thu, 11 April 2019 19:17
		Re: [GMCnet] Why put in thicker body pads then GM engineeringcalled for.? By: tgeiger on Sat, 13 April 2019 09:48
		Re: [GMCnet] Why put in thicker body pads then GM engineeringcalled for.? By: jimk on Sun, 14 April 2019 12:07

Previous Topic:	[GMCnet] Torque Wrench Calibration at Tallahassee
Next Topic:	[GMCnet] 455 crankshaft wanted.

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Sep 23 15:17:58 CDT 2024

Total time taken to generate the page: 0.01214 seconds