Macerator Hose [message #340801] |
Sat, 09 February 2019 11:52 |
Carl S.
Messages: 4186 Registered: January 2009 Location: Tucson, AZ.
Karma:
|
Senior Member |
|
|
Hopefully we are mature enough to handle this discussion without too many jokes or too much innuendo , but I have a question about macerator hoses.
I am still using the same macerator hose that came with the coach after ten plus years. It is a piece of 3/4" vinyl garden hose, cut to length, and fitted with a male threaded fitting clamped on the cut end. It is stored in a conduit storage pipe similar to this:
http://www.gmcmhphotos.com/photos/g3410-macerator-hose-storage.html
The problem is that the hose gets/is very stiff in cold weather, making it difficult to remove and then re insert it into the storage tube.
The question is, does anyone have any recommendations on a more pliable hose, specifically one that stays pliable in colder weather? What do you guys use?
Thanks,
Carl Stouffer
'75 ex Palm Beach
Tucson, AZ.
Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles, Solar battery charging. GMCSJ and GMCMI member
|
|
|