GMCforum: GMCnet » Entry Door

Home » Public Forums » GMCnet » Entry Door

Show: Today's Messages :: Polls :: Message Navigator

Entry Door [message #336825]

Sat, 08 September 2018 12:21

tgeiger

Messages: 518
Registered: February 2006
Location: kansas city

Karma:

Senior Member

Ok, so going to tackle this entry door. Going into the motorhome works fine but coming out is sometimes tough. The latch won't release the door. Also the door does not seal completly at the bottom. So I've ordered the hinge sleeves and the latch plate assembly from Jim and am ready to dig into it.
Anything to be aware of before I become totally unhindged??

Tom
76 Eleganza 2
KCMO

Tom Geiger 76 Eleganza II KCMO

Report message to a moderator

[Message index]

		Entry Door By: tgeiger on Sat, 08 September 2018 12:21
		Re: [GMCnet] Entry Door By: sgltrac on Sat, 08 September 2018 12:34
		Re: [GMCnet] Entry Door By: Ken Henderson on Sat, 08 September 2018 13:25
		Re: Entry Door By: tgeiger on Sat, 08 September 2018 19:20
		Re: [GMCnet] Entry Door By: Bruce Hart on Sun, 09 September 2018 16:02
		Re: [GMCnet] Entry Door By: Ken Henderson on Sun, 09 September 2018 18:12
		Re: [GMCnet] Entry Door By: jimk on Sun, 09 September 2018 20:23

Previous Topic:	Save the GMC Molds!
Next Topic:	[GMCnet] Headlights (was Save the GMC Molds!)

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Nov 05 10:42:55 CST 2024

Total time taken to generate the page: 0.00805 seconds