GMCforum: GMCnet » Got the bearings in, one has a rumble...

Home » Public Forums » GMCnet » Got the bearings in, one has a rumble...

Show: Today's Messages :: Polls :: Message Navigator

Got the bearings in, one has a rumble... [message #334944]

Wed, 11 July 2018 12:51

RF_Burns

Messages: 2277
Registered: June 2008
Location: S. Ontario, Canada

Karma:

Senior Member

So I got the bearings installed. Bought a grease packer as the manual method wasn't working for me.

Mid passenger side has a rumble. Two are smoe and one has a slight rumble. They are finger tight but not torgued and back to finger tight.

Any ideas about the rumble? New Timken bearings.

Thanks

Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that

Report message to a moderator

[Message index]

		Got the bearings in, one has a rumble... By: RF_Burns on Wed, 11 July 2018 12:51
		Re: Got the bearings in, one has a rumble... By: 77Royale on Wed, 11 July 2018 13:02
		Re: Got the bearings in, one has a rumble... By: GMC2000 on Wed, 11 July 2018 13:05
		Re: Got the bearings in, one has a rumble... By: GMC2000 on Wed, 11 July 2018 13:32
		Re: Got the bearings in, one has a rumble... By: jhbridges on Wed, 11 July 2018 14:00
		Re: Got the bearings in, one has a rumble... By: RF_Burns on Wed, 11 July 2018 21:25
		Re: Got the bearings in, one has a rumble... By: Bullitthead on Wed, 11 July 2018 22:36
		Re: Got the bearings in, one has a rumble... By: jhbridges on Thu, 12 July 2018 07:27
		Re: Got the bearings in, one has a rumble... By: jhbridges on Thu, 12 July 2018 07:27
		Re: Got the bearings in, one has a rumble... By: RF_Burns on Thu, 12 July 2018 20:08
		Re: [GMCnet] Got the bearings in, one has a rumble... By: USAussie on Thu, 12 July 2018 20:34
		Re: [GMCnet] Got the bearings in, one has a rumble... By: Rob on Thu, 12 July 2018 20:42
		Re: [GMCnet] Got the bearings in, one has a rumble... By: James Hupy on Thu, 12 July 2018 20:45
		Re: [GMCnet] Got the bearings in, one has a rumble... By: Bruce Hart on Thu, 12 July 2018 20:44
		Re: [GMCnet] Got the bearings in, one has a rumble... By: USAussie on Thu, 12 July 2018 23:21
		Re: Got the bearings in, one has a rumble... By: RF_Burns on Fri, 13 July 2018 07:35

Previous Topic:	[GMCnet] Problem getting the gas tank in.
Next Topic:	[GMCnet] Club liability insurance

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Nov 16 13:43:37 CST 2024

Total time taken to generate the page: 0.00940 seconds