GMCforum: GMCnet » Need some tips for installing new rear bearing races

Home » Public Forums » GMCnet » Need some tips for installing new rear bearing races

Show: Today's Messages :: Polls :: Message Navigator

Need some tips for installing new rear bearing races [message #334904]

Tue, 10 July 2018 20:14

RF_Burns

Messages: 2277
Registered: June 2008
Location: S. Ontario, Canada

Karma:

Senior Member

So I've got new Timken bearings to install in the rear wheels and need a few tips.

I put the races in the freezer for a couple of hours, then I tried one outer and it seemed really tough to install. I used the old race as a driving tool. I put a bit of grease on the hub to help, but maybe there is not suppose to be any lube put there?

Also did it on the concrete floor sitting on a piece of hardwood which is not perfectly flat so it was bouncing a bit... maybe that is part of my problem?

Any suggestions for this farmboy mechanic?

Thanks

Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that

Report message to a moderator

[Message index]

		Need some tips for installing new rear bearing races By: RF_Burns on Tue, 10 July 2018 20:14
		Re: Need some tips for installing new rear bearing races By: Carl S. on Tue, 10 July 2018 21:54
		Re: [GMCnet] Need some tips for installing new rear bearing races By: USAussie on Tue, 10 July 2018 22:47
		Re: [GMCnet] Need some tips for installing new rear bearing races By: Wackster on Thu, 12 July 2018 16:35
		Re: Need some tips for installing new rear bearing races By: Jerry Sitzlar on Tue, 10 July 2018 22:46
		Re: Need some tips for installing new rear bearing races By: RF_Burns on Thu, 12 July 2018 20:00

Previous Topic:	20 Year Anniversary
Next Topic:	Club liability insurance

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Nov 16 16:29:40 CST 2024

Total time taken to generate the page: 0.00790 seconds