GMCforum: GMCnet » [GMCnet] One thing leeds to another.

Home » Public Forums » GMCnet » [GMCnet] One thing leeds to another.

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] One thing leeds to another. [message #334466]

Mon, 02 July 2018 21:29

BobDunahugh

Messages: 2465
Registered: October 2010
Location: Cedar Rapids, IA

Karma:

Senior Member

I brought up the heatshields. That got me looking more closely at the exhaust system. Pipes are fairly good. BUT. Who ever replaced the system. They didn't put the 3" sleeves in the muffler bearings. ( And for those new owners. Our GMC's really do have muffler bearings. Really. ) So now I'm replacing the exhaust system. I've always seen the bearing sleeve welded to the tail pipe. Is that what GM did? Someone told me that GM used self drilling screws. I don't think that's the case. Bob Dunahugh
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

[Message index]

		[GMCnet] One thing leeds to another. By: BobDunahugh on Mon, 02 July 2018 21:29
		Re: [GMCnet] One thing leeds to another. By: powwerjon on Mon, 02 July 2018 22:02
		Re: [GMCnet] One thing leeds to another. By: Matt Colie on Tue, 03 July 2018 10:31
		Re: [GMCnet] One thing leeds to another. By: jhbridges on Tue, 03 July 2018 13:32

Previous Topic:	Main black tank valve not completely closing
Next Topic:	[GMCnet] Cruise Control Bellows Repair

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Sep 30 14:33:25 CDT 2024

Total time taken to generate the page: 0.00882 seconds