GMCforum: GMCnet » Leak in air line

Home » Public Forums » GMCnet » Leak in air line

Show: Today's Messages :: Polls :: Message Navigator

Leak in air line [message #334376]

Sun, 01 July 2018 20:18

Deb

Messages: 349
Registered: October 2016
Location: Logan Lake, BC

Karma:

Senior Member

I noticed my compressor seemed to be coming on more frequently than I was used to (in my vast experience with such things!! Rolling Eyes

). Checked the rear and discovered that the line is leaking at the compression fitting just before the schrader valve on the left side.

I have my tools with me but before I start Willy nilly trying to tighten or adjust that fitting I thought I would run it by y'all. The bag is holding fine. It is the fitting that is leaking. I am Hoping that it is just the fitting that has vibrated loose and that I can gently tighten it.

Comments? Thx.

Deb McWade Logan Lake, BC, CAN GMC Alumnus It's Bigger on the Inside!

Report message to a moderator

[Message index]

		Leak in air line By: Deb on Sun, 01 July 2018 20:18
		Re: Leak in air line By: Ken Burton on Sun, 01 July 2018 20:23
		Re: Leak in air line By: JohnS on Sun, 01 July 2018 21:03
		Re: Leak in air line By: RF_Burns on Mon, 02 July 2018 06:41
		Re: Leak in air line By: jhbridges on Mon, 02 July 2018 07:53
		Re: Leak in air line By: Deb on Mon, 02 July 2018 15:31
		Re: Leak in air line By: jhbridges on Mon, 02 July 2018 15:36
		Re: Leak in air line By: Deb on Mon, 02 July 2018 15:54
		Re: Leak in air line By: jhbridges on Tue, 03 July 2018 07:15
		Re: Leak in air line By: Deb on Wed, 04 July 2018 08:01
		Re: Leak in air line By: Ken Burton on Wed, 04 July 2018 08:59
		Re: Leak in air line By: Deb on Wed, 04 July 2018 12:50
		Re: Leak in air line By: jhbridges on Wed, 04 July 2018 08:08
		Re: [GMCnet] Leak in air line By: USAussie on Wed, 04 July 2018 08:59
		Re: Leak in air line By: jhbridges on Wed, 04 July 2018 12:19

Previous Topic:	Electronic QuadraJet and factory Electronic Spark Control
Next Topic:	On the Road Electrical Trouble-shooting

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Jun 28 10:44:01 CDT 2024

Total time taken to generate the page: 0.00783 seconds