GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] stock airbag replacement
[GMCnet] stock airbag replacement [message #332707] Mon, 28 May 2018 21:01 Go to previous message
Burt and Faye curtis is currently offline  Burt and Faye curtis   United States
Messages: 256
Registered: June 2012
Karma:
Senior Member
Due to a smallish leak in my airbag, I am in the midst of removing and
replacing it. I have copied off pretty good instructions and in them in
states to loosen the nut on the nonair inflation side. Then to remove the
nut on the other side (ok, it does mention several things to do before, but
I am cutting to the chase here). It says if when trying to loosen the
second nut, the entire stud spins, to stop. Next deflate bag, remove nut on
other side and then spin the bag off. This leaves the inflate side nut
captive in the mounting bracket. To remove it, one is to use an easy out.
This makes sense, but I was wondering if there might be an easier way that
one of you have been using. If not, Wednesday I use the above method.

Thanks in advance for help/ideas/

Fay Curtis
'76 Glenbrook
Kneeland, CA
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Insulated exhaust?
Next Topic: Inner tie rods
Goto Forum:
  


Current Time: Sat Sep 28 02:26:44 CDT 2024

Total time taken to generate the page: 0.00642 seconds