GMCforum: GMCnet » [GMCnet] Tid Bits.Tool to make small short 90 degree bends in brake lines.

Home » Public Forums » GMCnet » [GMCnet] Tid Bits.Tool to make small short 90 degree bends in brake lines.

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Tid Bits.Tool to make small short 90 degree bends in brake lines. [message #331875]

Wed, 09 May 2018 18:08

BobDunahugh

Messages: 2465
Registered: October 2010
Location: Cedar Rapids, IA

Karma:

Senior Member

We have lots of small, short, and sharp 90 degree bends in our brake lines. Made by S.U.R.&R. Tubing Pliers. Made for 1/4, and 3/16 tubing. You can bend tubing that's already installed. www. surrauto.com There is a brake tubing that has copper in it. Sold in rolls. Simpler to work with. Bob Dunahugh
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

[Message index]

		[GMCnet] Tid Bits.Tool to make small short 90 degree bends in brake lines. By: BobDunahugh on Wed, 09 May 2018 18:08
		[GMCnet] Tid Bits.Tool to make small short 90 degree bends in brake lines. By: BobDunahugh on Wed, 09 May 2018 18:10
		Re: [GMCnet] Tid Bits.Tool to make small short 90 degree bends in brake lines. By: USAussie on Wed, 09 May 2018 20:02

Previous Topic:	Leaking transmission
Next Topic:	Use Cases

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Sep 23 15:26:12 CDT 2024

Total time taken to generate the page: 0.00961 seconds