GMCforum: GMCnet » Oil Pressure Sender

Home » Public Forums » GMCnet » Oil Pressure Sender

Show: Today's Messages :: Polls :: Message Navigator

Oil Pressure Sender [message #331079]

Thu, 19 April 2018 09:27

Carl S.

Messages: 4186
Registered: January 2009
Location: Tucson, AZ.

Karma:

Senior Member

After the engine failure, rebuild, and break in process, I think my stock oil pressure sender has some schmutz in it and is reading erratically. I need to replace it. I walked out of the house this morning without the parts interchange manual (part of the aging process, I suppose) so I need the part number for the proper sender.

I also noticed there are two different part numbers, one for 0 - 60 psi and one for 0 - 80 psi. Which one should I get (closest to stock)? I replaced this part before and the parts man had a hard time finding a sender as opposed to a switch for an idiot light.

Thanks,

Carl Stouffer '75 ex Palm Beach Tucson, AZ. Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles, Solar battery charging. GMCSJ and GMCMI member

Report message to a moderator

[Message index]

		Oil Pressure Sender By: Carl S. on Thu, 19 April 2018 09:27
		Re: Oil Pressure Sender By: jhbridges on Thu, 19 April 2018 11:42
		Re: Oil Pressure Sender By: Carl S. on Thu, 19 April 2018 12:25
		Re: Oil Pressure Sender By: Bruce Hart on Thu, 19 April 2018 21:11
		Re: Oil Pressure Sender By: jhbridges on Fri, 20 April 2018 07:30
		Re: Oil Pressure Sender By: Ken Burton on Fri, 20 April 2018 07:49
		Re: [GMCnet] Oil Pressure Sender By: powwerjon on Fri, 20 April 2018 08:11
		Re: [GMCnet] Oil Pressure Sender By: mghamms on Fri, 20 April 2018 12:46
		Re: [GMCnet] Oil Pressure Sender By: Bruce Hart on Fri, 20 April 2018 20:28
		Re: [GMCnet] Oil Pressure Sender By: Ken Burton on Sat, 21 April 2018 00:58
		Re: [GMCnet] Oil Pressure Sender By: GMC Cruse on Sat, 21 April 2018 04:01
		Re: [GMCnet] Oil Pressure Sender By: Ken Burton on Sat, 21 April 2018 05:30
		Re: [GMCnet] Oil Pressure Sender By: Bruce Hart on Sat, 21 April 2018 09:42

Previous Topic:	Cracked exhaust manifold
Next Topic:	An interesting point of view from Chuck Woodbury

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Jun 25 02:10:53 CDT 2024

Total time taken to generate the page: 0.02572 seconds