| [GMCnet] Thanks to Randy Van Winkle for the EFI help today [message #330908] |
Sat, 14 April 2018 00:43  |
BobDunahugh
Messages: 2465
Registered: October 2010
Location: Cedar Rapids, IA
Karma:
|
Senior Member |
|
|
Randy had come over the other day to install the EBL that Jim K had brought to the GMCMI event for me. Randy said that I needed to drill out the seal over the idle screw. Got that done yesterday. Randy came over this morning to get the idle dead on. Well, he had the injectors acting in a way that he had never seen happen before at idle. OK. The new EBL may have a problem. Jim K hadn't left yet. So Jim was kind enough to unload some crates to find the other EBL that he had brought along. Then brought over that EBL And Randy had pulled his EBL out of his GMC. What's happening. Is that at idle. Both injectors on my 454 TB are discharging at the same time. Not alternating discharge at idle. And this was happening with all the EBLs tried. So we went back to the ECM that got us here to start with. Any ideas out there in the peanut gallery? My thanks to Randy, and Jim K for a good strong effort. Came very close to perfection. Bob Dunahugh
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
