GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » I am looking for a magic bullet
I am looking for a magic bullet [message #330430] Tue, 27 March 2018 22:52 Go to previous message
Ken Burton is currently offline  Ken Burton   United States
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma:
Senior Member
Well, I am now working on brakes. Everything is badly rusted. Right now I'm working on replacing master cylinder (rusted inside), combination valve (stuck in forward position), calipers (one is rusted inside), and both caliper brake hoses. All of the line nuts are rusted to the lines. I am soaking all of the connection nuts with Kroil daily. I am now 4 days into this and have loosen one nut on the master cylinder so far. So I'll continue soaking and maybe add some heat. I am looking for any other ideas for loosening these from the tubes. I am not wanting to replace steel lines to get this job done.

Any ideas will be appreciated.


Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Re: [GMCnet] 1976 Glenbrook (26') For Sale in Utah
Next Topic: $1000 Reward for Stolen GMC Motorhome
Goto Forum:
  


Current Time: Sat Sep 21 02:44:19 CDT 2024

Total time taken to generate the page: 0.00826 seconds