GMCforum: GMCnet » Fiberglass Ram Air Scoop to Grille

Home » Public Forums » GMCnet » Fiberglass Ram Air Scoop to Grille (Any reason not to glue it in?)

Show: Today's Messages :: Polls :: Message Navigator

Fiberglass Ram Air Scoop to Grille [message #330341]

Sun, 25 March 2018 18:19

Carl S.

Messages: 4186
Registered: January 2009
Location: Tucson, AZ.

Karma:

Senior Member

I have one of these: http://appliedgmc.com/prod.itml/icOid/574 and I had it mounted to my grille with a couple of bolts and nuts. Not surprisingly, the brittle plastic broke where the bolts were installed. I can reinforce the plastic with some aluminum strap, re-drill the holes, and mount it the same way, or I could epoxy the scoop to the grille and make it a permanent part of the grille.

I'm looking for opinions on the pros and cons of gluing it in versus bolting it the way it was with some reinforcement in the plastic.

Carl Stouffer '75 ex Palm Beach Tucson, AZ. Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles, Solar battery charging. GMCSJ and GMCMI member

Report message to a moderator

[Message index]

		Fiberglass Ram Air Scoop to Grille By: Carl S. on Sun, 25 March 2018 18:19
		Re: Fiberglass Ram Air Scoop to Grille By: Hal StClair on Sun, 25 March 2018 18:34
		Re: Fiberglass Ram Air Scoop to Grille By: Carl S. on Sun, 25 March 2018 21:25
		Re: Fiberglass Ram Air Scoop to Grille By: pjburt on Sun, 25 March 2018 21:39
		Re: Fiberglass Ram Air Scoop to Grille By: Carl S. on Mon, 26 March 2018 11:41
		Re: Fiberglass Ram Air Scoop to Grille By: Matt Colie on Mon, 26 March 2018 12:27
		Re: Fiberglass Ram Air Scoop to Grille By: Carl S. on Mon, 26 March 2018 18:07

Previous Topic:	[GMCnet] Rear bumper
Next Topic:	Rear Bearing Question

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Mar 20 08:45:12 CDT 2025

Total time taken to generate the page: 0.03131 seconds