GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Trip Report (Silver City, NM)
Trip Report [message #321256] Sat, 29 July 2017 17:30 Go to previous message
Carl S. is currently offline  Carl S.   United States
Messages: 4186
Registered: January 2009
Location: Tucson, AZ.
Karma:
Senior Member

We just got home from a week long, 400 mile round trip to Burro Mountain Homestead <http://www.burromountainhomestead.com/> For my wife's birthday. The insulation I recently installed on my fuel tanks seems to have helped with the hot fuel/tank pressure issue we Southwesterners have to contend with, although we didn't encounter the extreme temperatures we sometimes do during the Summer. I had just the slightest hint of 'vapor lock' on the final climb into high country approaching Silver City (about 2200' in 15 miles), but none on the way home (in hotter weather). Go figure.

The various repairs on the refurbished Onan Power Drawer (new Facet fuel pump from Applied, and the Pertronix ignition from Gary Bovee) seems to have done the trick. It ran flawlessly when needed to run the roof air (the last hour or so each way)

In spite of running on seven cylinders and having another really weak one, according to a recent leak down test, the coach ran great. It was hard to tell there was a problem from the driver's seat. I know it was risky to drive with a couple of burned exhaust valves, but I took the chance so as not to disappoint Kathy. The risk paid off in a wonderful trip. The GMC got us there and back and the Tracker we tow got us around wherever we wanted to go while there, both without issue.

Now on to repairing the head issues, but that is for material another subject.


Carl Stouffer '75 ex Palm Beach Tucson, AZ. Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles, Solar battery charging. GMCSJ and GMCMI member
 
Read Message
Read Message
Read Message
Previous Topic: Top End Work Question - Native guide needed
Next Topic: [GMCnet] Which oil is better? ( Blackstone's view )
Goto Forum:
  


Current Time: Mon Nov 04 21:39:48 CST 2024

Total time taken to generate the page: 0.03394 seconds