GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » NAPA SKF-21771 rear bearing seal fails the 0.25" test
NAPA SKF-21771 rear bearing seal fails the 0.25" test [message #318141] Mon, 29 May 2017 11:52 Go to previous message
RF_Burns is currently offline  RF_Burns   Canada
Messages: 2277
Registered: June 2008
Location: S. Ontario, Canada
Karma:
Senior Member
So I went to NAPA this morning to pick up the SKF-21771 rear bearing seals. I brought along a 1/4 hex bit to test the seal which actually measures 0.247". It fails the test as your can see in these photos.

http://www.gmcmhphotos.com/photos/g7044-skf-21771-rear-seal-fails-test.html

Any ideas?


Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that

[Updated on: Mon, 29 May 2017 11:53]

Report message to a moderator

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: An interesting point of view from Chuck Woodbury
Next Topic: WANTED : 2 good GMC Hubs for rear wheels
Goto Forum:
  


Current Time: Sun Jun 30 16:22:32 CDT 2024

Total time taken to generate the page: 0.07832 seconds