GMCforum: GMCnet » Would these fit our GMC's

Home » Public Forums » GMCnet » Would these fit our GMC's (Wheels)

Show: Today's Messages :: Polls :: Message Navigator

Would these fit our GMC's [message #314514]

Sun, 12 March 2017 16:32

Bruce Hart

Messages: 1501
Registered: October 2011
Location: La Grange, Wyoming

Karma:

Senior Member

Saw on E-bay

http://www.ebay.com/itm/182478118391?ul_noapp=true

I asked what the hub bore was and he stated:
New message from: 1970grayvette Top Rated Seller(4,419Red Star)
Just a hair over 4-1/2 inches.

This is a Set of FOUR (4) Alcoa dually wheels (all 4 are #160202), taken from a 1980s or 1990s GM truck- may fit others too. They are 16x6 wheels. The wheels have a few scratches, and they need cleaning. AND ONE WHEEL HAS A WELD REPAIR (see pics) that may require further attention or replacing (see pics). Come as pictured.

Bruce Hart 1976 Palm Beach 1977 28' Kingsley La Grange, Wyoming

[Updated on: Sun, 12 March 2017 16:34]

Report message to a moderator

[Message index]

		Would these fit our GMC's By: Bruce Hart on Sun, 12 March 2017 16:32
		Re: Would these fit our GMC's By: Hal StClair on Sun, 12 March 2017 16:57
		Re: [GMCnet] Would these fit our GMC's By: Bruce Hart on Sun, 12 March 2017 17:22
		Re: Would these fit our GMC's By: Carl S. on Sun, 12 March 2017 19:34
		Re: Would these fit our GMC's By: GMC Cruse on Sun, 12 March 2017 19:23

Previous Topic:	FYI Link to some good information on storage batteries
Next Topic:	[GMCnet] Roy Keen newtent@gmail.com

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Sep 20 01:39:36 CDT 2024

Total time taken to generate the page: 0.00805 seconds