GMCforum: GMCnet » Brake temps with infrared scope

Home » Public Forums » GMCnet » Brake temps with infrared scope

Show: Today's Messages :: Polls :: Message Navigator

Brake temps with infrared scope [message #314278]

Wed, 08 March 2017 11:02

Scott Nutter

Messages: 782
Registered: January 2015
Location: Houston/San Diego

Karma:

Senior Member

I am going to start documenting all my brake temps with the infrared gun now that everything is new there.
Previously I would judge temps by feeling the heat with my hand on the rims.

Where would be the exact correct place on the rims or drums to get the most correct temp values?
And roughly, what should those values be? It is a stock brake system with 80mm calipers up front.
Thanks, Scott

Scott Nutter 1978 Royale Center Kitchen, Patterson 455, switch pitch tranny, 3.21 final drive, Quad bags, Dave Lenzi super duty mid axle disc brakes, tankless water heater, everything Lenzi. Alex Ferrera installed MSD Atomic EFI Houston, Texas

Report message to a moderator

[Message index]

		Brake temps with infrared scope By: Scott Nutter on Wed, 08 March 2017 11:02
		Re: Brake temps with infrared scope By: Ken Burton on Thu, 09 March 2017 04:42

Previous Topic:	Re: [GMCnet] Brake temps with infrared scope
Next Topic:	Re: [GMCnet] In tank Pump ?

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Sep 20 09:45:00 CDT 2024

Total time taken to generate the page: 0.00816 seconds