GMCforum: GMCnet » innerCV joint leak

Home » Public Forums » GMCnet » innerCV joint leak

Show: Today's Messages :: Polls :: Message Navigator

innerCV joint leak [message #314158]

Mon, 06 March 2017 13:53

midlf

Messages: 2212
Registered: July 2007
Location: SE Wisc. (Palmyra)

Karma:

Senior Member

I have a leak on both inner CV joints. The leak is not where I expected. It is not where the seal housing fits on the joint itself but in the area where the rubber seal is crimped to the seal housing. It is leaking where the factory Not where the tin meets the casting. That joint, which I installed is dry. The rubber to metal joint made by the manufaturer is what is leaking. It has thrown out a lot of grease.

What is going on? Is this a manufacturing defect on both joints? Did I overfill the joint with grease? I'm looking to get it corrected or put my mind to rest before Shawnee.

Steve Southworth
1974 Glacier TZE064V100150 (for workin on)
1975 Transmode TZE365V100394 (parts & spares)
Palmyra WI

Report message to a moderator

[Message index]

		innerCV joint leak By: midlf on Mon, 06 March 2017 13:53
		Re: [GMCnet] innerCV joint leak By: James Hupy on Mon, 06 March 2017 14:01
		Re: [GMCnet] innerCV joint leak By: lcoldren on Mon, 06 March 2017 15:44
		Re: [GMCnet] innerCV joint leak By: jimk on Mon, 06 March 2017 17:18
		Re: [GMCnet] innerCV joint leak By: midlf on Tue, 07 March 2017 05:07
		Re: innerCV joint leak By: midlf on Tue, 07 March 2017 11:35
		Re: [GMCnet] innerCV joint leak By: jimk on Tue, 07 March 2017 13:42

Previous Topic:	[GMCnet] Air compressor Fusing.
Next Topic:	[GMCnet] Eric Tanner

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Nov 15 17:07:23 CST 2024

Total time taken to generate the page: 0.01616 seconds