GMCforum: GMCnet » Quick question about control arm bushings

Home » Public Forums » GMCnet » Quick question about control arm bushings (Removal)

Show: Today's Messages :: Polls :: Message Navigator

Quick question about control arm bushings [message #313931]

Wed, 01 March 2017 11:53

shaunone

Messages: 80
Registered: August 2016
Location: Cranbrook, B.C.

Karma:

Member

Can the upper and lower control arms be removed without removing the axle? For example, separate the upper and lower ball joints and swing hub assembly out of the way?

I am planning on installing the upper offset bushing, but I figure I might as well replace all the bushings (they have about 120K on them). What do you think?

1977 Palm Beach, 455, mostly stock and original

Report message to a moderator

[Message index]

		Quick question about control arm bushings By: shaunone on Wed, 01 March 2017 11:53
		Re: [GMCnet] Quick question about control arm bushings By: James Hupy on Wed, 01 March 2017 11:57
		Re: [GMCnet] Quick question about control arm bushings By: sgltrac on Wed, 01 March 2017 14:03
		Re: [GMCnet] Quick question about control arm bushings By: USAussie on Wed, 01 March 2017 14:45
		Re: [GMCnet] Quick question about control arm bushings By: Keith V on Wed, 01 March 2017 15:08
		Re: [GMCnet] Quick question about control arm bushings By: USAussie on Wed, 01 March 2017 16:14
		Re: [GMCnet] Quick question about control arm bushings By: sgltrac on Wed, 01 March 2017 18:07
		Re: [GMCnet] Quick question about control arm bushings By: USAussie on Wed, 01 March 2017 19:10
		Re: Quick question about control arm bushings By: JohnL455 on Thu, 02 March 2017 10:57

Previous Topic:	Ca. storage facilities for Older RVs
Next Topic:	45 Amp Intelli-Power Converter Conversion Questions

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Nov 15 01:58:20 CST 2024

Total time taken to generate the page: 0.06291 seconds