GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Propane Tank Hold Down (How Does It Bolt Down)
Propane Tank Hold Down [message #313252] Wed, 15 February 2017 12:37 Go to previous message
A Hamilto is currently offline  A Hamilto   United States
Messages: 4508
Registered: April 2011
Karma:
Senior Member
A PO removed the OEM tank and installed a gas grill tank fitting on the regulator. I have the OEM tank and need to re-install it in the Sequoia.

I don't have any of the mounting hardware.

Is there supposed to be anything under/on top of the plywood to span body framing members, or fender washers on the bottom or what?

Carriage bolts?

I can't tell anything from the CanyonLands, as a PO removed the OEM propane tank from it as well. I can cannibalize the regulator and any other gas plumbing stuff I need from it, but there are only 4 holes in the bottom of the compartment to hint at what was originally there.

If there is some kind of bracket/hardware above or below the plywood, pictures would be greatly appreciated.
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Front wheel bearing service, hub repair
Next Topic: [GMCnet] Did the previous owner drilled a hole in the dash. Have Idea on how to hide it.
Goto Forum:
  


Current Time: Sat Jan 11 22:07:17 CST 2025

Total time taken to generate the page: 0.04099 seconds