GMCforum: GMCnet » Bogie swing arm locating pins

Home » Public Forums » GMCnet » Bogie swing arm locating pins (sheared off and looking for replacement part nmber)

Show: Today's Messages :: Polls :: Message Navigator

Bogie swing arm locating pins [message #311968]

Tue, 10 January 2017 13:30

larry.whisler

Messages: 356
Registered: August 2005

Karma:

Senior Member

GMCers,

I am in the process of doing a bogie control arm mounting pin
and associated bushing replacement on our 76 Glenbrook.

The bushings in the control arm were badly worn and as a result
of this, several of the locating pins were sheared off.

These are the three locating pins that are mounted into the ends of the control
arm that the thrust washer fits onto.

Does anyone out here have a replacemnt part number for these little pins?

Any help would be appreciated.

larry

Report message to a moderator

[Message index]

		Bogie swing arm locating pins By: larry.whisler on Tue, 10 January 2017 13:30
		Re: [GMCnet] Bogie swing arm locating pins By: sgltrac on Tue, 10 January 2017 16:01
		Re: [GMCnet] Bogie swing arm locating pins By: larry.whisler on Tue, 10 January 2017 16:56
		Re: [GMCnet] Bogie swing arm locating pins By: Ken Henderson on Tue, 10 January 2017 17:44
		Re: [GMCnet] Bogie swing arm locating pins By: emerystora on Tue, 10 January 2017 17:40
		Re: [GMCnet] Bogie swing arm locating pins By: James Hupy on Tue, 10 January 2017 17:48
		Re: [GMCnet] Bogie swing arm locating pins By: Jp Benson on Tue, 10 January 2017 19:01
		Re: Bogie swing arm locating pins By: Rick Staples on Tue, 10 January 2017 22:31
		Re: [GMCnet] Bogie swing arm locating pins By: James Hupy on Tue, 10 January 2017 22:39
		Re: [GMCnet] Bogie swing arm locating pins By: Jp Benson on Wed, 11 January 2017 07:26

Previous Topic:	Toilet removal help
Next Topic:	[GMCnet] I have a 403 engine block ready to use for sale

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Nov 10 16:18:49 CST 2024

Total time taken to generate the page: 0.00780 seconds