GMCforum: GMCnet » [GMCnet] Len. Hear are the dimentions for the intake manifold for our 403's

Home » Public Forums » GMCnet » [GMCnet] Len. Hear are the dimentions for the intake manifold for our 403's

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Len. Hear are the dimentions for the intake manifold for our 403's [message #311913]

Mon, 09 January 2017 08:10

BobDunahugh

Messages: 2465
Registered: October 2010
Location: Cedar Rapids, IA

Karma:

Senior Member

The stock iron 403 intake carb base surface is 2.75 inch's above the front block horizontal surface. My concern is that the Edelbrock 2711 alum intake is 3.2 inch's. But the Mondeo shop says that the 2711, and 3711 manifolds will work in a GMC.

Bob Dunahugh 78 Royale

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

[Message index]

		[GMCnet] Len. Hear are the dimentions for the intake manifold for our 403's By: BobDunahugh on Mon, 09 January 2017 08:10
		[GMCnet] Compairison of the dimentions for three intake manifolds for our 403's By: BobDunahugh on Sun, 15 January 2017 00:13
		Re: [GMCnet] Compairison of the dimentions for three intake manifolds for our 403's By: Harry on Sun, 15 January 2017 16:15

Previous Topic:	air bag pressure
Next Topic:	[GMCnet] Should I buy the ECM controlled Olds distributor for $35?

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Nov 17 19:30:06 CST 2024

Total time taken to generate the page: 0.01185 seconds