GMCforum: GMCnet » Easiest way?

Home » Public Forums » GMCnet » Easiest way?

Show: Today's Messages :: Polls :: Message Navigator

Easiest way? [message #309258]

Mon, 24 October 2016 08:47

jhbridges

Messages: 8412
Registered: May 2011
Location: Braselton ga

Karma:

Senior Member

My water heater has expired. Either the reset has popped or the element is FUBAR. What's the least worst way to get at the water heater in a 76 Eleganza II with a side wet bath? The lower cabinet in the shower opens on the right and you can see the heater, but there isn't room to reach around beside it and get to the reset on the top (left side as it's mounted) behind/beneath the overflow valve.
The coach has a full size bed built above the original twin/settee rear setup which pretty much precludes taking the wall behind the bath module loose without tearing out the bed frame and fittings. Any help or suggestions will be appreciated.

--johnny

Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons. Braselton, Ga. I forgive them all, save those who hurt the dogs. They must answer to me in hell

Report message to a moderator

[Message index]

		Easiest way? By: jhbridges on Mon, 24 October 2016 08:47
		Re: Easiest way? By: jknezek on Mon, 24 October 2016 08:52
		Re: [GMCnet] Easiest way? By: George Zhookoff on Mon, 24 October 2016 08:52
		Re: Easiest way? By: JohnS on Mon, 24 October 2016 09:14
		Re: Easiest way? By: lqqkatjon on Mon, 24 October 2016 09:22
		Re: [GMCnet] Easiest way? By: bdub on Mon, 24 October 2016 09:41
		Re: Easiest way? By: jhbridges on Mon, 24 October 2016 10:52
		Re: [GMCnet] Easiest way? By: Brian Waddell on Mon, 24 October 2016 17:14
		Re: Easiest way? By: Scott Nutter on Mon, 24 October 2016 20:05
		Re: [GMCnet] Easiest way? By: sgltrac on Mon, 24 October 2016 21:57
		Re: Easiest way? By: Ken Burton on Mon, 24 October 2016 22:01
		Re: Easiest way? By: jknezek on Tue, 25 October 2016 07:43
		Re: Easiest way? By: jhbridges on Tue, 25 October 2016 08:38
		Re: Easiest way? By: Scott Nutter on Tue, 25 October 2016 10:34
		Re: Easiest way? By: A Hamilto on Tue, 25 October 2016 11:38
		Re: [GMCnet] Easiest way? By: sgltrac on Tue, 25 October 2016 22:19
		Re: Easiest way? By: jhbridges on Tue, 25 October 2016 14:48
		Re: Easiest way? By: Scott Nutter on Wed, 26 October 2016 09:47
		Re: Easiest way? By: A Hamilto on Wed, 26 October 2016 11:20
		Re: [GMCnet] Easiest way? By: USAussie on Wed, 26 October 2016 16:25
		Re: Easiest way? By: jhbridges on Wed, 26 October 2016 17:22

Previous Topic:	[GMCnet] Maxx Fan
Next Topic:	[GMCnet] How about putting a 454 TB on a EFI port injection aluminum intake manifold.

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Nov 19 04:38:51 CST 2024

Total time taken to generate the page: 0.09221 seconds