GMCforum: GMCnet » Nordlock washers for CV joints

Home » Public Forums » GMCnet » Nordlock washers for CV joints

Show: Today's Messages :: Polls :: Message Navigator

Nordlock washers for CV joints [message #308780]

Sat, 15 October 2016 18:28

pyolet

Messages: 78
Registered: August 2006
Location: Helena, MT

Karma:

Member

I've used loctite and 75lb torque for the cv joint bolts in the past and haven't had any problems, but have read about several folks having these bolts back out. Here's a solution I am trying...they worked great on a Terex loader recently. Not cheap but they will not loosen.

http://a64.tinypic.com/1191ds1.jpg

1975 Avion 26' Transmode TZE365V100846 Helena, Montana EBL TBI, AL in man, in-tank pumps, AL rad, rear discs, Alcoas, Dakota Digital dash, all LED int and ext roof markers, Generac, Hubler torsion bars, Quadrabags, Manny tranny, 3.70, Zip Dee.

Report message to a moderator

[Message index]

		Nordlock washers for CV joints By: pyolet on Sat, 15 October 2016 18:28
		Re: Nordlock washers for CV joints By: cadelec on Sat, 15 October 2016 19:24
		Re: [GMCnet] Nordlock washers for CV joints By: Ken Henderson on Sat, 15 October 2016 21:26
		Re: [GMCnet] Nordlock washers for CV joints By: pyolet on Sat, 15 October 2016 22:43

Previous Topic:	Digi Panel installation question
Next Topic:	Have you ever wanted your own lighthouse?

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Nov 18 21:10:50 CST 2024

Total time taken to generate the page: 0.02002 seconds