GMCforum: GMCnet » Front rotor fastener torque

Home » Public Forums » GMCnet » Front rotor fastener torque

Show: Today's Messages :: Polls :: Message Navigator

Front rotor fastener torque [message #307405]

Mon, 19 September 2016 13:07

wally

Messages: 643
Registered: August 2004
Location: Omaha Nebraska

Karma:

Senior Member

I'm replacing a front rotor. The service manual page 5-42 shows fastener torque of 35 ft/lbs. They are 1/2 fine thread (20) and grade 8. They seemed way tighter than 35 ft/lbs when removing. Bolt torque charts read 65 to over 100 ft/lbs for this size fastener. Dumb question but is the manual right?

Wally Anderson
Omaha NE
75 Glenbrook

Report message to a moderator

[Message index]

		Front rotor fastener torque By: wally on Mon, 19 September 2016 13:07
		Re: [GMCnet] Front rotor fastener torque By: James Hupy on Mon, 19 September 2016 13:24
		Re: [GMCnet] Front rotor fastener torque By: Matt Colie on Mon, 19 September 2016 14:09
		Re: [GMCnet] Front rotor fastener torque By: wally on Mon, 19 September 2016 14:24

Previous Topic:	[GMCnet] Trip report Coronado Speed Festival
Next Topic:	HEI advance stop bushing

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Nov 16 11:42:08 CST 2024

Total time taken to generate the page: 0.00871 seconds